Synthesis of Square Planar Cu4 Clusters.

Template-assisted synthesis of well-defined polynuclear clusters remains a challenge for [M4 ] square planar topologies. Herein, we present a tetraamine scaffold R L(NH2 )4 , where L is a rigidified resorcin[4]arene, to direct the formation of C4 -symmetric R L(NH)4 Cu4 clusters with Cu-Cu distances around 2.7 Å, suggesting metal-metal direct interactions are operative since the sum of copper's van der Waals radii is 2.8 Å. DFT calculations display HOMO to HOMO-3 residing all within a 0.1 eV gap. These four orbitals display significant electron density contribution from the Cu centers suggesting a delocalized electronic structure. The one-electron oxidized [Cu4 ]+ species was probed by variable temperature X-band continuous wave-electron paramagnetic resonance (CW-EPR), which displays a multiline spectrum at room temperature. This work presents a novel synthetic strategy for [M4 ] clusters and a new platform to investigate activation of small molecules.

Correction: Krízová et al. Fullerene Derivatives Prevent Packaging of Viral Genomic RNA into HIV-1 Particles by Binding Nucleocapsid Protein. Viruses 2021, 13, 2451.

The authors wish to make the following corrections to this paper [...].

Fullerene Derivatives Prevent Packaging of Viral Genomic RNA into HIV-1 Particles by Binding Nucleocapsid Protein.

Fullerene derivatives with hydrophilic substituents have been shown to exhibit a range of biological activities, including antiviral ones. For a long time, the anti-HIV activity of fullerene derivatives was believed to be due to their binding into the hydrophobic pocket of HIV-1 protease, thereby blocking its activity. Recent work, however, brought new evidence of a novel, protease-independent mechanism of fullerene derivatives' action. We studied in more detail the mechanism of the anti-HIV-1 activity of N,N-dimethyl[70]fulleropyrrolidinium iodide fullerene derivatives. By using a combination of in vitro and cell-based approaches, we showed that these C70 derivatives inhibited neither HIV-1 protease nor HIV-1 maturation. Instead, our data indicate effects of fullerene C70 derivatives on viral genomic RNA packaging and HIV-1 cDNA synthesis during reverse transcription-without impairing reverse transcriptase activity though. Molecularly, this could be explained by a strong binding affinity of these fullerene derivatives to HIV-1 nucleocapsid domain, preventing its proper interaction with viral genomic RNA, thereby blocking reverse transcription and HIV-1 infectivity. Moreover, the fullerene derivatives' oxidative activity and fluorescence quenching, which could be one of the reasons for the inconsistency among reported anti-HIV-1 mechanisms, are discussed herein.

Carbon Nano-onions: Potassium Intercalation and Reductive Covalent Functionalization.

Herein we report the synthesis of covalently functionalized carbon nano-onions (CNOs) via a reductive approach using unprecedented alkali-metal CNO intercalation compounds. For the first time, an in situ Raman study of the controlled intercalation process with potassium has been carried out revealing a Fano resonance in highly doped CNOs. The intercalation was further confirmed by electron energy loss spectroscopy and X-ray diffraction. Moreover, the experimental results have been rationalized with DFT calculations. Covalently functionalized CNO derivatives were synthesized by using phenyl iodide and n-hexyl iodide as electrophiles in model nucleophilic substitution reactions. The functionalized CNOs were exhaustively characterized by statistical Raman spectroscopy, thermogravimetric analysis coupled with gas chromatography and mass spectrometry, dynamic light scattering, UV-vis, and ATR-FTIR spectroscopies. This work provides important insights into the understanding of the basic principles of reductive CNOs functionalization and will pave the way for the use of CNOs in a wide range of potential applications, such as energy storage, photovoltaics, or molecular electronics.

Conjugated Molecular Nanotubes.

Molecular compounds with permanent tubular architectures displaying radial π-conjugation are exceedingly rare. Their radial and axial delocalization presents them with unique optical and electronic properties, such as remarkable tuning of their Stokes shifts, and redox switching between global and local aromaticity. Although these tubular compounds display large internal void spaces, these attributes have not been extensively explored, thus presenting future opportunities in the development of materials. By using cutting-edge synthetic methodologies to bend aromatic surfaces, large opportunities in synthesis, property discovery, and applications are expected in new members of this family of conjugated molecular nanotubes.

Radially Oriented [n]Cyclo-meta-phenylenes.

Molecular compounds with zigzag carbon nanotube geometries are exceedingly rare. Here we report the synthesis and characterization of carbon-based nanotubes with zigzag geometry, best described as radially oriented [n]cyclo-meta-phenylenes, extending the tubularene family of compounds. By the incorporation of edge-sharing benzene rings into the tubularene's radial π-surface, we have uncovered the first step to give rise to the emergence of radial orbital distribution in zigzag nanorings.

Nanoscale nickel metal organic framework decorated over graphene oxide and carbon nanotubes for water remediation.

In this report, highly crystalline and well-dispersed nano-sized nickel metal organic framework (MOFs) was decorated over graphene oxide (GO) and carbon nanotubes (CNTs) platforms to form hybrid nanocomposites. These as-synthesized hybrid nanocomposites were synthesized through a one-pot green solvothermal method. The prepared nanocomposites were characterized by SEM, TEM, EDS, XRD, FT-IR, Raman and TGA techniques. XRD analysis revealed the crystalline structure of the hybrid nanocomposites. Morphological and elemental studies also verified successful decoration of nickel-benzene dicarboxylate (Ni-BDC) MOFs over GO and CNT platforms. Chemical analysis collected through IR, and thermal analysis collected through TGA technique, illustrated the presence of all the components in the hybrid nanomaterials. Methylene blue (MB) was used as a model organic pollutant to analyze the adsorption capacity of the prepared nanocomposites. According to the findings, a strong interaction exists between the MB molecule and the developed adsorbents at which due to the synergistic effect, the hybrid nanocomposites show several times higher adsorption capacity compared to that of parent materials. This improvement can be due to several reasons: high surface area of the MOFs in the composites resulting from the smaller size of MOFs, presence of the pores formed between the MOFs and the platforms and different morphological characteristic of Ni-BDC MOFs in hybrid nanocomposites, compared to bare Ni-BDC MOFs. Furthermore, the isotherm and kinetic studies revealed that the adsorption of MB onto the newly prepared adsorbents could best be explained by the Langmuir and Pseudo-second order kinetic models. A regeneration study demonstrated the highly stable nature of the hybrid nanocomposites.

α-DTC70 Fullerene Performs Significantly Better than ß-DTC70 as Electron Transporting Material in Perovskite Solar Cells.

In this work, two new C70 isomers, α and ß bis(2-(thiophen-2-yl)ethyl)-C70-fullerene mono-adducts (DTC70), were synthesized, characterized and used as electron transporting materials (ETMs) in perovskite solar cells (PSCs). Our results show that the α isomer improves both the J sc and FF values of the devices, when compared to the results for the ß-isomer and to those for phenyl-C70-butyric acid methyl ester (PC71BM), used as control. Devices based on α-DTC70 achieved a power conversion efficiency (PCE) of 15.9%, which is higher than that observed with PC71BM (15.1%).

Tubularenes.

We report the synthesis and characterization of conjugated, conformationally rigid, and electroactive carbon-based nanotubes that we term tubularenes. These structures are constructed from a resorcin[n b]arene base. Cyclization of the conjugated aromatic nanotube is achieved in one-pot eight-fold C-C bond formation via Suzuki-Miyaura cross-coupling. DFT calculations indicate a buildup of strain energy in excess of 90 kcal mol-1. The resulting architectures contain large internal void spaces >260 Å3, are fluorescent, and able to accept up to 4 electrons. This represents the first scaffolding approach that provides conjugated nanotube architectures.

Variation of Interfacial Interactions in PC61BM-like Electron-Transporting Compounds for Perovskite Solar Cells.

The synthesis, characterization, and incorporation of phenyl-C61-butyric acid methyl ester (PC61BM)-like derivatives as electron transporting materials (ETMs) in inverted perovskite solar cells (PSCs) are reported. These compounds have the same structure except for the ester substituent, which was varied from methyl to phenyl to thienyl and to pyridyl. The three latter derivatives performed better than PC61BM in PSCs, mainly attributed to the specific interactions of the fullerenes with the perovskite layer, as evidenced by X-ray photoelectron spectroscopy (XPS) and steady-state and time-resolved photoluminescence (SS- and TRPL) measurements. The experimental results were fully supported by density functional theory (DFT) calculations, which showed that the strongest interactions were exhibited by the compound possessing the pyridyl substituent.

Sustainable synthesis and remarkable adsorption capacity of MOF/graphene oxide and MOF/CNT based hybrid nanocomposites for the removal of Bisphenol A from water.

A series of novel absorbents based on Cu-BDC MOFs decorated over graphene oxide (GrO) and carbon nanotubes (CNTs) hybrid nanocomposites, namely Cu-BDC@GrO and Cu-BDC@CNT, are synthesized via a facile and one-pot green solvothermal method for water remediation. The nanocomposites were characterized by XRD, TEM, SEM, EDS, Raman, FTIR, TGA, XPS, Zetasizer and ICP-OES instruments. XRD results confirmed the high crystalline structure of the synthesized hybrid nanocomposites. Morphological analysis by SEM and TEM verified the successful decoration of nano-sized Cu-BDC MOFs over GrO and CNT platforms; whereas, EDS and XPS analysis confirmed the presence of all components in the hybrid nanocomposites. Bisphenol A was used in this study as a model organic pollutant that is sometimes present in the industrial wastewater to test the adsorption capacity of the prepared hybrid nanomaterials toward their removal from water. The hybrid nanomaterials showed remarkable adsorption capacity of 182.2 and 164.1 mg/g toward the removal of BPA, which was several times higher than that of 60.2 mg/g for Cu-BDC MOF itself. The Langmuir, Freundlich, Temkin and D-R isotherm models were applied to analyze the experimental data and the results revealed that the Freundlich model describes the experimental data best. A kinetic study was carried out and it showed that the prepared nanomaterials could remove maximum amount of BPA from water in 30 min. The pseudo-first order, pseudo-second order and intra-particle diffusion models were applied to evaluate the kinetic data and the results suggested that the kinetics data could be well fitted to the pseudo-second order kinetic model. Additionally, the BAP adsorption process onto the hybrid nanocomposites was spontaneous and exothermic. The π-π interactions between the BPA and hybrid nanomaterials played a vital role during the BPA adsorption process. The higher adsorption capacity and water stability makes them a good candidate for water remediation applications.

Enhanced Open-Circuit Voltage in Perovskite Solar Cells with Open-Cage [60]Fullerene Derivatives as Electron-Transporting Materials.

The synthesis, characterization, and incorporation of open-cage [60]fullerene derivatives as electron-transporting materials (ETMs) in perovskite solar cells (PSCs) with an inverted planar (p-i-n) structure is reported. Following optical and electrochemical characterization of the open-cage fullerenes 2a-c, p-i-n PSCs with a indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene)-polystyrene sulfonate (PEDOT:PSS)/perovskite/fullerene/Ag structure were prepared. The devices obtained from 2a-b exhibit competitive power conversion efficiencies (PCEs) and improved open-circuit voltage (Voc) values (>1.0 V) in comparison to a reference cell based on phenyl-C61-butyric-acid methyl-ester (PC61BM). These results are rationalized in terms of a) the higher passivation ability of the open-cage fullerenes with respect to the other fullerenes, and b) a good overlap between the highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO) levels of 2a-b and the conduction band of the perovskite.

Correction: A new family of fullerene derivatives: fullerene-curcumin conjugates for biological and photovoltaic applications.

[This corrects the article DOI: 10.1039/C8RA08334G.].

Three-Dimensional Graphene Nanostructures.

This Communication details the implementation of a new concept for the design of high-performance optoelectronic materials: three-dimensional (3D) graphene nanostructures. This general strategy is showcased through the synthesis of a three-bladed propeller nanostructure resulting from the coupling and fusion of a central triptycene hub and helical graphene nanoribbons. Importantly, these 3D graphene nanostructures show remarkable new properties that are distinct from the substituent parts. For example, the larger nanostructures show an enhancement in absorption and decreased contact resistance in optoelectronic devices. To show these enhanced properties in a device setting, the nanostructures were utilized as the electron-extracting layers in perovskite solar cells. The largest of these nanostructures achieved a PCE of 18.0%, which is one of the highest values reported for non-fullerene electron-extracting layers.

Atomically Precise Au25(SG)18 Nanoclusters: Rapid Single-Step Synthesis and Application in Photothermal Therapy.

Remarkable recent advances on Au25(SR)18 nanoclusters have led to significant applications in catalysis, sensing, and magnetism. However, the existing synthetic routes are complicated, particularly for the water-soluble Au25(SG)18 nanoclusters. Here, we report a single-step concentration and temperature-controlled method for rapid synthesis of the Au25(SG)18 nanoclusters in as little as 2 h without the need for low-temperature reaction or even stirring. A systematic time-based investigation was carried out to study the effects of volume, concentration, and temperature on the synthesis of these nanoclusters. Further, we discovered for the first time that the Au25(SG)18 nanoclusters exhibit excellent photothermal activities in achieving 100% cell death for MDA-MB-231 breast cancer cells at a power of 10 W/cm2 using an 808 nm laser source, demonstrating applications toward photothermal therapy.

New thiophene-based C60 fullerene derivatives as efficient electron transporting materials for perovskite solar cells.

The synthesis of new C60 fullerene derivatives functionalized with thiophene moieties as well as with electron donating or electron withdrawing groups, bromine (Br) or cyano (CN), respectively, using Bingel reactions is reported. The synthesized derivatives were used as the electron transporting materials (ETMs) in inverted perovskite solar cells (PSCs). Compared to devices fabricated with [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM), the new derivatives showed similar electrochemical properties and electron mobilities. However, PSCs based on the new derivatives synthesized in this work exhibited higher power conversion efficiencies (PCEs) than PC61BM based devices, which were ascribed to their better passivation ability, likely due to specific interactions between the fullerene addend and the perovskite layer surface. Devices based on the fullerene bearing the CN group exhibited an additionally improved efficiency due to the increased dielectric constant (ε r) of this derivative. These results show that the new functionalized fullerene derivatives can act as efficient ETMs in inverted PSCs.

A new family of fullerene derivatives: Fullerene-curcumin conjugates for biological and photovoltaic applications.

The synthesis and characterization of a family of [60]fullerocurcuminoids obtained via Bingel reactions is reported. The new C60 derivatives include curcumin and curcuminoids with a variety of end groups. Preliminary biological experiments show the potential activity of the compound containing a curcumin addend, which exhibits moderate anti-HIV-1 and radical scavenger properties, but no anti-cancer activity. In addition, the new fullerocurcuminoids exhibit HOMO/LUMO energy levels that are reasonably matched with those of perovskites and when they were tested in perovskite solar cells (PSCs) as the electron transporting material (ETM), photoconversion efficiencies ranging from 14.04%-14.95% were obtained, whereas a value of 16.23% was obtained for [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) based devices.

Fullerenes in Biology and Medicine.

Fullerenes and related carbon based derivatives have shown a growing relevance in biology and medicine, mainly due to the unique electronic and structural properties that make them excellent candidates for multiple functionalization. This review focuses on the most recent developments of fullerene derivatives for different biological applications.

Transformation of doped graphite into cluster-encapsulated fullerene cages.

An ultimate goal in carbon nanoscience is to decipher formation mechanisms of highly ordered systems. Here, we disclose chemical processes that result in formation of high-symmetry clusterfullerenes, which attract interest for use in applications that span biomedicine to molecular electronics. The conversion of doped graphite into a C80 cage is shown to occur through bottom-up self-assembly reactions. Unlike conventional forms of fullerene, the iconic Buckminsterfullerene cage, I h-C60, is entirely avoided in the bottom-up formation mechanism to afford synthesis of group 3-based metallic nitride clusterfullerenes. The effects of structural motifs and cluster-cage interactions on formation of compounds in the solvent-extractable C70-C100 region are determined by in situ studies of defined clusterfullerenes under typical synthetic conditions. This work establishes the molecular origin and mechanism that underlie formation of unique carbon cage materials, which may be used as a benchmark to guide future nanocarbon explorations.